Fujitsu XG0224 User Manual page 392
Hide thumbs
Also See for XG0224:
- Hardware manual (47 pages) ,
- User manual (614 pages) ,
- Safety and installation manual (14 pages)
Table of Contents
Advertisement
XG Series User's Guide
offline (backup): Port offline by backup port function
offline (icmpwatch):
Port offline by ether L3 monitoring function
down : Indicates that the port is in the linkdown state.
auto
: Indicates that automatic negotiation is enabled.
10M/100M/1000M/10G:
Indicates the baud rate (10Mbps, 100Mbps, 1000Mbps or 10Gbps) of
the currently linked Ethernet port.
Full/Half:
Indicates the full duplex or half duplex mode of the currently linked port.
MDI/MDI-X:
Indicates the type of the currently linked MDI.
2)
Flow control state
Displays in the sending or receiving order of the flow control.
on
: Indicates that the flow control is enabled.
off
: Indicates that the flow control is disabled.
-
: Indicates that the port is undefined because it is not in the linkup state.
3)
Port type
Indicates the port type.
Normal: Indicates that the port is used as a normal port.
Mirror : Indicates that the port is used as a target port for mirroring.
LinkAggregation:
Indicates that the port is used as a link aggregation port.
This parameter also indicates the number of the link aggregation group
that the port belongs to.
"*LinkAggregation" is displayed when the link aggregation port is not
linked up as a multiplexed link in the linkup state.
Backup:
Indicates that the port is used as a backup port.
This parameter also indicates the number of the backup group that the
port belongs to as well as the master or backup type.
"Standby" is displayed to a standby port.
Backup LA:
Indicates that the port is used as a backup link aggregation port.
This parameter also indicates the number of the link aggregation group
that the port belongs to.
It further indicates the number of the backup group that the port belongs
to as well as the master or backup type.
"Standby" is displayed to a standby port.
"*standby" is displayed when the port is not established (not switched)
as a link aggregation standby port in the linkup state.
"*LA" is displayed when the link aggregation port is not linked up as a
multiplexed link in the linkup state.
–
: Indicate indetermination by unused port or definition contradiction.
4)
State transition time
Displays the time when the port has changed to the current state.
392
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
Commands
Advertisement
Table of Contents
