Fujitsu XG0224 User Manual page 364

XG Series User's Guide
8) inspiration_temp
Environment temperature.
phy_temp
temperature around PHY.
slot1_temp
temperature around Expansion Card (SLOT1).
At the time of three following states, "--" is displayed.
The Expantion Card without Thermal Sensor is installed. (CX4)
The Invalid Expantion Card is installed.
The Expantion Card is not installed.
slot2_temp
temperature around Expansion Card (SLOT2).
At the time of three following states, "--" is displayed.
The Expantion Card without Thermal Sensor is installed. (CX4)
The Invalid Expantion Card is installed.
The Expantion Card is not installed.
9) Slot Information
The type of Expansion Card.
SJ10GCX4Z
SJ10GSFPZ
NO_PRESENT : The Expantion Card is not installed.
UNKNOWN
10) power_consumption
Power consumption of the device.
XG0440DC / XG0440DCR
# show system status
Current-time
Startup-time
restart_cause
machine_state
access_direction
power_redundancy
PSU1 state
PSU2 state
PSU1 type
PSU2 type
power_consumption
FAN state
inspiration_state
warning time :
recover time :
internal_state
inspiration_temp
internal_temp
1) Current time
Present date and time.
2) Startup time
Date and time when the system started up.
3) restart_cause
Cause for the system startup.
The following system startup causes are displayed:
power on : The power has been turned on.
reset : The reset command has been issued.
reset switch : The [RESET] switch has been pressed.
system down : System-down has occurred.
: Installed Expansion Card is SJ10GCX4A. (CX4)
: Installed Expansion Card is SJ10GSFPA. (SFP+)
: Installed Expansion Card is Invalid Card.
Fri Dec 18 17:04:50 2009
:
Fri Dec 18 16:04:36 2009
:
: power on
: RUNNING
rear access
:
: redundant
: NORMAL
: NORMAL
: AC
: AC
: 78 W
: NORMAL
: NORMAL
Fri Dec 18 17:00:45 2009
Fri Dec 18 17:02:30 2009
: NORMAL
: 28 C
: 33 C
364
Chapter 5 Command Reference
---(1)
---(2)
---(3)
---(4)
---(5)
---(6)
---(7)
---(8)
---(9)
---(10)
---(11)
---(12)
---(13)
System Operations and Display Commands