Table of Contents
Advertisement
6
Establish the connection.
●
On the access point, hold down the WPS
connection button for a few seconds.
●
On the camera, press the [ ] button to
go to the next step.
7
Import images.
●
Follow steps 6 – 9 in "Adding a
Smartphone Using the Wi-Fi Menu"
( = 118) to choose the smartphone,
adjust the privacy setting, and then import
the images.
●
If you chose [PIN Method] in step 5, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
Connecting to Listed Access Points
1
View the listed access points.
●
View the listed networks (access points)
as described in steps 1 – 3 of "Using
WPS-Compatible Access Points"
( = 120).
2
Choose an access point.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose a network (access point),
and then press the [ ] button.
3
Enter the access point password.
●
Press the [ ] button to access the
keyboard and enter the password
= 33
.
(
)
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Next], and then press the
[ ] button.
4
Choose [Auto].
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Auto], and then press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
Tv, Av, M, and C Modes
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
121
Advertisement
Table of Contents
