Table of Contents
Advertisement
4
Shoot.
Shooting Still Images
1) Focus.
●
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
●
If [ ] flashes on-screen, move the [ ]
switch to raise the flash. The flash will fire
upon shooting. If you prefer not to use the
flash, push it down with your finger, into
the camera.
2) Shoot.
●
Press the shutter button all the way down
to shoot. In low-light conditions, the flash
fires automatically when you have it
raised.
●
The captured image will be displayed for
approximately 2 seconds on the screen.
●
Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Recording Movies
1) Start recording.
●
Press the Movie button to begin
recording. [
Rec] is displayed with the
elapsed time.
●
Displays black bars on the top and
bottom edges of the screen. The black
bars indicate image areas not recorded.
●
Frames displayed around any detected
faces indicate that they are in focus.
●
Once recording begins, take your finger
off the movie button.
2) Finish recording.
●
To stop movie recording, press the movie
button again.
●
An orange AF frame is displayed with [
] if the camera cannot
focus when you press the shutter button halfway. No picture is
taken, even if you press the shutter button all the way down.
If using a lens that supports Dynamic IS ( = 78), the camera
●
adjusts the range displayed on-screen to make the subject larger
once you begin shooting a movie.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
Tv, Av, M, and C Modes
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
24
Advertisement
Table of Contents
