Silencing Camera Operations; Hiding Hints And Tips; Cleaning The Image Sensor; Turning Auto Cleaning Off - Canon EOS M3 User Manual

Hide thumbs Also See for EOS M3:
Table of Contents

Advertisement

Silencing Camera Operations

The camera can be silenced when you press the shutter button halfway or
trigger the self-timer.
Choose [Beep] on the [ 3] tab and then
choose [Off].

Hiding Hints and Tips

Hints and tips are normally shown when you choose an option in the quick
setting menu ( = 31) or shooting functions screen ( = 61). If you
prefer, you can deactivate this information.
Choose [Hints & Tips] on the [ 3] tab and
then choose [Off].

Changing Touch Screen Settings

The sensitivity of the touch screen can be changed to respond to a lighter
touch, or not respond to touch at all.
Choose [Touch Operation] on the [ 3] tab
and then choose the desired setting.
Choose [Sensitive] to boost touch screen
sensitivity, or choose [Disable] to turn
touch screen control off.
Note the following precautions when operating the touch screen.
-
Since the LCD monitor is not pressure-sensitive, do not use
any sharp objects such as your fingernail or a ballpoint pen, for
touch operations.
Do not use wet fingers for touch screen operations.
-
If the LCD monitor has any moisture or if your fingers are wet,
-
the touch screen may not respond or incorrect operation may
occur. In such a case, turn off the power and wipe the LCD
monitor with a cloth.
-
Do not attach any protective sheet (commercially available) or
sticker on the LCD monitor. Doing so may reduce touch screen
responsiveness.
The touch screen may not be as responsive in [Sensitive] mode
when performing successive touch operations.

Cleaning the Image Sensor

The camera has a cleaning function that automatically removes dust from
the image sensor when the power is turned on or off, or when the camera
shuts off in Power Saving mode. This cleaning function can be activated
whenever you like, or shut off entirely.

Turning Auto Cleaning Off

1
Access the setting screen.
After turning the camera on in shooting
mode, choose [Sensor cleaning] on the
[ 3] tab and press the [ ] button.
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Auto cleaning
then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, and C Modes
Tv, Av, and M Mode
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
], and
142

Advertisement

Table of Contents
loading

Table of Contents