Table of Contents
Advertisement
●
Although the electronic viewfinder is produced under extremely
high-precision manufacturing conditions and more than 99.99% of
the pixels meet design specifications, in rare cases some pixels
may be defective or may appear as red or black dots. This is not a
malfunction. They do not affect the images recorded.
●
Vertical or horizontal black bars may be displayed depending on
the selected aspect ratio ( = 45). The black bars indicate image
areas not recorded.
●
] button on the electronic viewfinder to change the
Press the [
screen displayed.
In the menu ( = 32), set the [Display Control] option on the
●
[ 1] tab to [Manual] to keep the camera screen from turning on
even when you remove your eye from the viewfinder. Press the
] button on the electronic viewfinder to bring up the camera
[
display in this mode.
●
Using the electronic viewfinder in [
], [ ], [
] modes will result in a smoother display in both the viewfinder
[
and camera screen. In the menu ( = 32), set the [Display
Mode] option on the [
1] tab to [Power Saving] to return to the
normal display and conserve battery power.
If the Wi-Fi ( = 115) or keyboard screen ( = 33) displays are
●
brought up in electronic viewfinder mode, the display will switch
back to the camera screen.
Different brightness settings ( = 140) can be defined for the
●
electronic viewfinder and camera screens.
Using an External Flash (Sold Separately)
More sophisticated flash photography is possible with an optional
Speedlite EX series flash. For movie shooting using an LED light, the
optional Speedlite 320EX flash is available.
], [
], and
Still Images
●
Non-EX series Canon flash units may not fire correctly or may not
fire at all, in some cases.
●
Use of non-Canon flash units (especially high-voltage flash units)
or flash accessories may prevent normal camera operation and
may damage the camera.
●
Also refer to the Speedlite EX series manual for additional
information. This camera is a Type-A camera that can use all the
features of EXseries Speedlites.
1
Attach the flash.
●
Make sure the camera is off before
attaching the flash.
2
Turn the flash on, and then turn the
camera on.
●
A red [ ] icon is now displayed.
●
The flash pilot lamp will light up when the
flash is ready.
Before Use
Basic Guide
Movies
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
Tv, Av, M, and C Modes
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
154
Advertisement
Table of Contents
