Table of Contents
Advertisement
●
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
●
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
●
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
●
To restore the original setting, choose [ ]
in step 1.
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you
have pressed the shutter button. If the camera is unsteady while you are
pressing the shutter button, it will not affect your shot.
●
Follow step 1 in "Using the Self-Timer"
( = 40) and choose [ ].
●
Once the setting is complete, [ ] is
displayed.
●
Follow step 2 in "Using the Self-Timer"
( = 40) to shoot.
Shooting by Touching the Screen (Touch
Shutter)
With this option, instead of pressing the shutter button, you can simply
touch the screen and release your finger to shoot. The camera will focus
on subjects and adjust image brightness automatically.
Still Images
Movies
Still Images
1
Enable touch-shutter function.
●
Press the [
] button, choose [Touch
Shutter] on the [
1] tab, and then
choose [Enable] ( = 32).
2
Shoot.
●
Touch the subject on the screen to take
the picture.
●
To cancel touch shutter, choose [Disable]
in step 1.
●
If focus is not achieved, the AF frame turns orange and images
cannot be taken.
●
Even while the shot is displayed, you can prepare for the next
shot by touching [
].
Before Use
Basic Guide
Movies
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
Tv, Av, M, and C Modes
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
41
Advertisement
Table of Contents
