Set Calendar And Clock (H3) - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
6

Set calendar and clock (H3)

Not available for users with access level / type "Information only".
When required, the clock can be corrected, so that the "time stamps"
for fire alarms, faults, etc. will be correct.
NOTE! The RTC component has no built-in battery, i.e. if EBL128
has been powerless (no mains and no battery backup) and after
software download, the date, day of the week and the time have to be
set when EBL128 is powered-up again.

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press "3") to menu H3.
H3 Set calendar and clock

Press "A".

Use the keypad to set the date, time and weekday.
Step right / left with the arrow keys.

If the changes shall be saved, press "A", if not press "Return" (P9) to
menu H3.

Scroll to another menu or leave the menu system by pressing
"Return".
EBL128 version 2.0.x, Daily user's manual
21