User Interface And Remote Control Parametering The Setting; General; Setting Parameters; (Settings, Diagnosis, Status) - Fujitsu AOYA18LALL Installation And Operating Manual

Heat pump, Split, single service
Parametering the setting
3.6

General

3.6.1
Only the parameters accessible to levels:
U End user
I Start-up
S Specialist
Are described in this document.
The access levels are specified in the second
column of the table by means of the letters U, I and S.
The OEM parameters are not described and require
a manufacturer's access code.
Basic
display
List of function lines
3.6.3

(settings, diagnosis, status)

Line
Function
Date and time
1 U Hours / minutes
2 U Day / Month
3 U Year
5 S Start of Summer time (Day / Month)
6 S End of Winter time (Day / Month)
The change of hour will appear at 3:00 first Sunday after the regulated date
User interface
20 U Language
22 I Info
26 S Operation locking
27 S Programming locking
28 S Direct setting
34
Brief
End user
press
Time and date
User interface
CC1 time programme
...
Press
for 3 seconds
End user
Date and time
User interface
CC1 time programme
...
Saving...

Setting parameters

3.6.2
- Choose the desired level.
- Scroll the menu list.
- Choose the desired menu.
- Scroll the function lines.
- Choose the desired line.
- Adjust the parameter
- Check the setting by pressing OK
- To return the menu, press ESC
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
Hours / minutes
Day / Month
Year
Start-up
Specialist
Hours / minutes
Day / Month
Year
Start of Summer time
End of Winter time
Setting range
or display
00:00... 23:59
01.01... 31.12
1900... 2099
01.01...31.12
01.01...31.12
English, ...
Temporary | Permanent
On | Off
On | Off
...automatic | ...with
confirmation
Installation and operating manual "1350-EN"
1 Hours 1...24 h
2 Minutes 0...60 min
3
OEM
1
2
3
4 01.01...31.12
5
Setting
setting
increment
1
1
1
1
1
Temporary
confirmation
Basic
25.03
25.10
Off
Off
...with