Fujitsu AOYA18LALL Installation And Operating Manual page 38

Heat pump, Split, single service
Line Function
900 S Change of regime
Operating mode at end of concrete slab drying period
Cooling circuit 1
901 U Regime
902 U Comfort ambient temperature setpoint
907 U Release
908 I Flow temp setp at OT 25°C
909 I Flow temp setp at OT 35°C
912 I Cooling limit at OT
913 S Lock time at end of heating
918 S Summer comp start at OT
919 S Summer comp end at OT
920 S Summer comp setp increase
923 S Flow temp setp min OT 25°C
924 S Flow temp setp min OT 35°C
928 I Influence of the ambient temperature
If the installation is fitted with an room sensor:
This function enables you to choose the ambient temperature's influence on the setting.
If no value is entered, the setting is made based on the temperature control.
If the parameter is set at 100%, the setting is only based on the ambient temperature.
932 S Room temp limitation
938 S Mixing valve decrease
939 S Type of servomotor
940 S Switching differential 2-pos
941 S Servomotor travel time
945 S Mixing valve in heating mode
946 S Lock time dewpoint limiter
947 S Flow temp setp incr hygro
948 S Flow setp incr start at r.h.
950 S Flow temp diff dewpoint
963 S With prim contr/system pump
*Basic setting : 1 circuit = No ; 2 circuits = Yes
969 S Change of regime
Heating adjustment, Circuit 2
If the installation consists of 2 heating circuits (Only with the 2nd circuit kit option)
1010 U Comfort ambient temperature setpoint
1012 U Reduced ambient temperature setpoint
38
Setting range
or display
None, Protection mode,
Reduced, Comfort,
Automatic
off, Automatic
17...40 °C
24h/day, Time programme
HC, Time programme 5 /
Refresh
6...35 °C
6...35 °C
- - -, 8...35 °C
- - -, 8...100
20...50 °C
20...50 °C
- - -, 1...10 °C
6...35 °C
6...35 °C
- - -, 1...100 %
- - -, 0,5...4
0...20 °C
2-pos, 3-pos
0...20 °C
30...873 s
Control, Open
- - -, 10...600 min
- - -, 1...20 °C
0...100 %
---, 0...5 °C
No, Yes
None, off, Automatic
From reduced temperature
to 35°C
from frost-free temp... to
comfort temperature
Installation and operating manual "1350-EN"
Setting Basic
setting
increment
1 Protection
mode
off
0,5 °C 24 °C
24h/day
0,5 °C 20 °C
0,5 °C 16 °C
0,5 °C 24 °C
1 h 24
1 °C 26 °C
1 °C 40 °C
1 °C 4 °C
0,5 °C 18 °C
0,5 °C 18 °C
1 % 80 %
0,5 °C 0,5 °C
1 °C 0 °C
3-pos
0,5 °C 2,5 °C
1 s 240 s
Control
10 min 60 min
1 °C 10 °C
1 % 60 %
1 °C 2 °C
No*
off
0,5 °C 20 °C
0,5 °C 18 °C