Power Cables - NEC Generation N3000 M760s User Manual

Under no circumstances should the user attempt to disassemble the AC adapter. The AC adapter has no
user-replaceable parts. Inside the AC adapter are hazardous voltages that can cause serious personal
injury. A defective AC adapter must be returned to your dealer.
The AC adapter is intended for use with a computer and meets EN60950 standards.
•
Do not cover or place objects on the AC Adapter. Keeping the adapter clear of objects lets the adapter
cool properly during use.
•
The AC adapter is intended for use in a protected environment.
•
Only use the AC adapter that comes with your system. Although other adapters may look similar, using
them can damage your system.

Power Cables

Warning:
Do not hold the power plug with a wet hand.
Do not disconnect/connect the plug while your hands are wet. Failure to follow this warning
may cause an electric shock.
Use the authorized power cord only.
Use only the power cord that comes with your equipment. Using an unauthorized power cord may cause a
fire when the electric current exceeds the rated flow.
Also, observe the following to prevent an electric shock or fire caused by a damaged cord.
•
Do not stretch the cord harness.
•
Do not alter, modify, or repair the power cord.
•
Do not bend the power cord.
•
Do not twist the power cord.
•
Do not step on the power cord. Keep chemicals away from the power cord.
•
Do not bundle power cords.
•
Do not place any object on the power cord.
•
Do not pinch the power cord.
•
Do not secure the power cord with staples or equivalents.
Do not use the attached power cord for any other devices or usage.
The power cord that comes with your equipment is designed to connect with this equipment, and its safety
has been tested. Do not use the attached power cord for any other purpose. Doing so may cause a fire or an
electric shock.
Do not pull the cord harness to disconnect the power cord.
Hold the connector of the power cord and pull it straight. Pulling the cord harness or applying excess force
to the connector may cause a damage to the cable, resulting in a fire or an electric shock.
© 2007-2009, NEC Computers S.A.S. All rights reserved.
Preface
7