Replacing Batteries; Using The Battery Pack - NEC Generation N3000 M760s User Manual

Table of Contents

Replacing the Power Cord

Replace the power cord if it gets damaged. Contact your dealer for an exact replacement. The replacement

must be of the same type and voltage rating as the original cord. Refer to the information indicated on the

original power cord.

The plug must display an international agency approval marking. The cord must be suitable for use in the

end-user country. Consult your dealer or the local electrical authorities if you are unsure of the type of

power cord to use in your country.

Extension Cord

If an extension cord is used with this product, make sure that the sum of the ampere ratings of all the

products plugged into the extension cord does not exceed the extension cord's ampere rating. Also, make

sure that total amperage of all the products plugged into any one outlet at any one time does not exceed 15

amperes.

Cables

The EMC performances of system are guaranteed provided that efficient shields are used on cable's

interface.

The use of shielded interface cable is required for USB, IEEE1394, serial, printer, game, analogue or

digital audio/video, Ethernet LAN, PS\2, TV or FM antennas, and generally all high speeds cables'

interfaces.

Only Ethernet LAN or RTC modem cable can have length exceeding 3 meters.

For Ethernet LAN cable, use FTP shielded cables only (cat 5).

Batteries

Using the Battery Pack

For battery precautions, please refer