Table of Contents
Advertisement
Getting Started
Before installing the CPV5000
2
After removing the CPV5000 from its packaging:
!
Warning
2-2
• Check for obvious physical damage.
• Verify that the coin cell battery is in its holder and inserted correctly.
• Verify that the CPU fan is connected.
• Install main memory SIMMs. Refer to Chapter 3 and Chapter 4 for
information about the SIMM headers and the installation of main
memory SIMMs.
• A minimum of two, identical, main memory SIMMs are required. The
SIMMs may be installed in either bank.
• Set the CPU speed using J10, J14, J15, J29 (refer to CPU speed
settings, page 3-4).
• Set the CPU type (AMD/Intel) using J30 (refer to CPU Voltage
Settings, page 3-5).
Make sure that you disconnect the chassis from the main
power supply before you continue.
Advertisement
Table of Contents
