Bmc Related - Fujitsu PRIMEQUEST 2000 Series Message Reference

MMB Messages

2.1.12 BMC related

The BMC related messages are listed below.
■Temperature Sensor related (BMC)
B0010571
'CPU#0 Temp': Temperature high warning: $$ C
Meaning:
A temperature rise (Warning) was detected.
Corrective action:
If the Inlet Temp is normal and CPU Temp is abnormal, please check the state of the filter, the heat sink and
installation environment.
Severity:
Warning
B0010572
'CPU#1 Temp': Temperature high warning: $$ C
Meaning:
A temperature rise (Warning) was detected.
Corrective action:
If the Inlet Temp is normal and CPU Temp is abnormal, please check the state of the filter, the heat sink and
installation environment.
Severity:
Warning
B0010591
'CPU#0 Temp': Temperature high critical: $$ C
Meaning:
A temperature rise (Critical) was detected.
Corrective action:
If the Inlet Temp is normal and CPU Temp is abnormal, please check the state of the filter, the heat sink and
installation environment.
When the improvement is not seen, replace the CPU.
Severity:
Error
B0010592
'CPU#1 Temp': Temperature high critical: $$ C
Meaning:
A temperature rise (Critical) was detected.
Corrective action:
If the Inlet Temp is normal and CPU Temp is abnormal, please check the state of the filter, the heat sink and
installation environment.
When the improvement is not seen, replace the CPU.
Severity:
Error
B0018571
'CPU#0 Temp': Temperature OK
Meaning:
The temperature is now normal.
Corrective action:
No action is necessary.
Severity:
Info
27
CA92344-0540-06