Cpu/Memory Scale-Up Controller/Memory Buffer Related - Fujitsu PRIMEQUEST 2000 Series Message Reference

MMB Messages
C5A10361
MMB#1 Firmware Update Failed (NOR bank change error)
Meaning:
Switching of NOR bank has failed during the MMB#1 firmware update.
Corrective action:
MMB must be replaced.
Severity
Error
C5A104FF
Switch Over Failed
Meaning:
MMB Active/Standby switching has failed.
Corrective action:
MMB must be replaced.
Severity:
Error
C5A32XYZ
SB#X was replaced with Reserved SB SB#Y in Partition#Z
Meaning:
A faulty SB#X was switched with Reserved SB#Y in Partition#Z.
Corrective action:
No action is necessary.
Severity:
Info
C5A33X0Y
Reserved SB#X was removed from Partition#Y
Meaning:
Reserved SB#X that was set in Partition#Y was removed.
Corrective action:
No action is necessary.
Severity:
Info
C5A350XY
If SB#X replace with Reserved SB in Partition#Y Memory Mirror is disabled
Meaning:
Mirror Mode setting was Disabled when incorporating a Reserved SB that had been set.
Corrective action:
No action is necessary.
Severity
Info

2.1.15 CPU/Memory Scale-up Controller/Memory Buffer related

CPU, Memory Scale-up Controller or Memory Buffer related messages are listed below.
C8A00600
Correctable QPI Path error { (SB#x-CPU#Y) }
Meaning:
A correctable error was detected in the QPI transmission path between the CPUs( or Memory Scale-up
Controllers).
Maximum two CPUs(or Memory Scale-up Controllers) that detected the error are specified in {}.
Corrective action:
No action is necessary.
Severity:
Info
50
CA92344-0540-06