Loading Interval Presets - Epson RUNSENSE SF-810 User Manual

3
Hold down D while measuring is stopped to
reset the measurement results. Data measured
up to that point is stored in the product's
memory. You can check this data by pressing D
on the Time screen.
See "Viewing past workouts" on page 49.

Loading interval presets

Loading interval presets
1
Press C on the Time screen to display the
Measurement screen.
GPS positioning starts, and the Measurement
screen is displayed once positioning is complete.
See "GPS positioning" on page 20.
2
Hold down B on the Measurement screen to
display the Measure set. menu.
Measuring your workouts
3
Press C or D to highlight Mode, then press A.
4
Press C or D to highlight Interval, then press A.
5
Press C or D to highlight one of the three
presets, then press A.
37