Recording Laps Automatically - Epson RUNSENSE SF-810 User Manual

Recording laps
automatically
Use the AT Lap function to automatically record laps
whenever a set time or distance is reached.
Note:
You can also adjust the AT Lap function from the Run
Connect PC application.
See "Adjusting the AT Lap settings" on page 64.
1
Press C on the Time screen to display the
Measurement screen.
GPS positioning starts, and the Measurement
screen is displayed once positioning is complete.
See "GPS Positioning" on page 19.
Measuring your workouts
2
3
4
5
6
44
Hold down B on the Measurement screen to
display the Measure set. menu.
Press C or D to highlight AT Lap, then press A.
Press C or D to highlight an entry, then press A.
Select whether you want the laps to be recorded
after a specific time or distance is reached. Press
C or D to highlight Time or Distance, then
press A.
Press C or D to adjust the lap time or distance,
then press A when finished.