Epson RUNSENSE SF-810 User Manual page 5

Settings
Other features
Introduction
Allows you to change the settings for the product.
Communicate with external devices
O
See "Smart Phone" on page 74.
Invert the screen's display (Invert function)
O
See "System Set. options" on page 76.
Adjust the screen's contrast (Adjust contrast function)
O
See "System Set. options" on page 76.
Turn on the light automatically when the screen changes (Auto Light function)
O
See "System Set. options" on page 76.
Set an alarm (Alarm function)
O
See "System Set. options" on page 76.
Turn off operation tones (Operation Tones function)
O
See "System Set. options" on page 76.
Reset configuration information in the product's memory (Initialize function)
O
See "System Set. options" on page 76.
You can measure pitch and stride using the built-in stride sensor.
O
See "Calibrating the sensors" on page 22.
You can skip GPS positioning if it is taking too long.
O
See "Skipping GPS positioning" on page 20.
You can measure without performing GPS positioning.
O
See "Indoor mode" on page 20.
You can monitor, analyze, compare and share your recorded data using the RUNSENSE View
O
web app.
See "Using RUNSENSE View" on page 51.
4