Screen Settings; Customizing The Measurement Screen - Epson RUNSENSE SF-810 User Manual

Setting items
Alarm
Key Tones
Initialize
Software Version
*indicates the default setting.

Screen settings

There are four different measurement screens
available. Each screen shows different information
about your current activity.
Note:
For details on switching between screens, see
display" on page 32.
Customizing the measurement
screen
You can customize the Measurement screen to display
various information about your current activity.
1
Do one of the following to display the
Measurement screen:
Settings
Value
Tones
Vib. (vibration)
Tones & Vib. (vibration)*
OFF
ON*
OFF
—
—
"Screen
Explanation
Adjusts the alarm type and time (1 to 10 minutes).
You can also set this from the Measure set. menu.
Turns button sounds on or off.
Resets all setting information (Comm. Settings, User Settings, Sys.
Settings and Measure set.) and pulse/stride sensor information in
the product's memory.
Measurement history data is also deleted.
Displays the firmware version.
O If want to use GPS positioning, press C on
the Time screen and wait for the GPS to
determine your location.
O If GPS positioning is not working or is
taking too long, press C on the Time screen.
Press C or D to highlight Skip on the GPS
positioning screen, then press A to
temporarily skip positioning. The product
will continue to search for a GPS signal
while measuring your activity.
See "Skipping GPS positioning" on page 20.
O If you want to measure in Indoor mode,
press C on the Time screen. Press C or D to
highlight Indoor on the GPS positioning
screen, then press A.
See "Indoor mode" on page 20.
77