Epson Runsense SF-110 User Manual page 19

If you select No, you will need to
re-enter the initial settings.
Press A.
A
A signal is received from the GPS
and time is automatically
synchronized.
When Complete is displayed, press
A
A.
The Time screen is displayed.
Note:
O When you do not use the product for a while, it
enters sleep mode and the time display turns off.
The display is restored the next time you move the
product.
O If time synchronization fails, the product may not
be able to receive a GPS signal in its current
location. Set the Time Adjust option from Clock Set
in Sys. Settings.
See "Adjusting the time" on page 27.
Setting up your SF-110
19