Table of Contents
Advertisement
Calibrating the stride sensor
About the stride sensor
This product contains a stride sensor that uses a stride algorithm to learn your pace from your actual speed and your
body's vibration frequency. The stride sensor calculates distance and laps with high precision, and measures your
pitch and stride even when the GPS signal is lost.
Calibrating the sensor
When using the product for the first time, you need to run continuously for a certain amount of time to make sure
that your stride is accurately detected by the sensor. Follow these guidelines to ensure the product learns your
specific running style quickly:
O If you are outside with no obstructions overhead, make sure you run for approximately 10 minutes.
O If you are surrounded by tall buildings, make sure you run for approximately 30 minutes.
You only need to do this the first time you use the SF-110 and if you reset the product.
Note:
If you plan to use the product to measure running, run at your usual pace when you calibrate the sensor. Errors may occur
if your typical stride pattern is significantly different from your initial calibration.
Setting up your SF-110
24
Advertisement
Table of Contents
