Alarm - Epson Runsense SF-110 User Manual

Note:
O Hold down A on the Measurement screen (while measuring is stopped), or the Settings screen to display the Time
screen.
O When you don't use the product for a while, it enters sleep mode and the display turns off. The display turns back on
the next time a button is pressed or you move the product. You can turn off the sleep function.
See "System settings" on page 78.
O The Time screen is displayed if you don't press any buttons for a set period of time. This period of time varies
depending on the current screen:
Sys. Settings/User Settings/Recall screen: 3 minutes.
Measurement screen (while not measuring): 60 minutes.

Alarm

Your product can sound an alarm when certain operations or exercises are performed. The following table explains
the meaning of each alarm depending on the current watch mode.
AT Lap
See "Recording laps automatically" on page 36.
AT Pause
See "Starting/stopping measuring automatically" on page 37.
Target Pace
See "Setting a pace" on page 39.
Setting up your SF-110
Measurement setting
When lap is paused
When measuring is stopped
O
When measuring restarts
O
When you are off the target pace
O
26
Timing