Gps Positioning - Epson Runsense SF-110 User Manual

GPS positioning

When you switch to the Measurement screen, the
product receives a signal from various satellites, and
identifies your GPS position.
c
Important:
Make sure you are outside with no obstructions
overhead, and try to keep the product as still as
possible.
Press D to display the Menu.
D
Press C or D to highlight Workout.
C/D
Press A.
A
GPS positioning starts.
Setting up your SF-110
Note:
O It usually takes less than two minutes to complete
GPS positioning.
If it takes more than two minutes and Failed is
displayed, select Cancel, move to a different
location, and try again.
O When GPS positioning is complete, the product
receives a signal from the GPS satellite once every
hour.
When the measurement screen is displayed, you can
start measuring.
See "Measuring your workouts" on page 29.
Skipping GPS positioning
If you do not want to use GPS features, or if GPS
positioning is taking too long, press C or D to highlight
Skip, then press A.
22
When GPS positioning is complete,
an alarm sounds and the
measurement screen is displayed.