Telnet - Toshiba e-STUDIO 332s User Manual Advanced

For Windows PS Drivers
Launch the printer properties screen.
1
Reference
"Launch the Utility" P. 124
Select the [Device Settings] tab.
2
Click on [Get installed options
3
automatically] and then click on
[Setup].
Click [OK].
4
Uninstall the Utility
Click on [Start], and then select
1
[Control Panel]>[Add or Remove
Programs].
Select [TOSHIBA Network Extension]
2
and click on [Remove].
Follow the instructions on the screen and
3
complete the uninstallation.

TELNET

You can configure each type of setting with a
Telnet command.
Note
Telnet access to the machine settings is turned off in the
initial settings.
In order to use Telnet commands, set [Telnet] to
[Active], either on the webpage or on the machine control
panel.
For Windows 7/Windows Vista/Windows Server 2008 R2/
Windows Server 2008, Telnet commands are inactive in
the initial settings.
In order to use Telnet commands, select [Start] >
[Control Panel] > [Programs] > [Programs and
Features] > [Turn Windows features on or off]. Set
[Telnet Client] to active in the displayed dialog box.
Memo
For the next procedure, the following environment will be
used as an example. The details may differ depending on
the OS you are using.
- OS: Windows 7
- IP Address: 192.168.0.2
- MAC Address: 00:80:87:84:9C:9B
Click on [Start] and select [All
1
Programs]>[Accessories]>
[Command Prompt].
Following "(Driver Password): /Users/
2
Username>" enter "ping (Space)
machine IP Address".<Press the
Enter> key and check that access is
enabled.
E.g.: "C:/Users/WINDOWS > ping 192.168.0.2"
Following "telnet (Space)", enter the IP
3
address of the machine and press the
<Enter> key, in order to access the
machine through Telnet.
E.g.: "C:/Users/WINDOWS>telnet 192.168.0.2"
After "login:" enter "root" and press the
4
<Enter>.
If a prompt is displayed, enter your
5
password following "Password" and press
the <Enter> key.
Enter E.g: "password: 849C9B".
Memo
The default "root" password is the last 6
alphanumerical digits of the machine's MAC address.
If a menu command is displayed, enter
6
the menu number you would like to
change, and press the <Enter> key.
Change the settings as required.
7
Save settings and log out of the
8
machine.
- 125 -
Windows Utilities
7