Using Snmpv3; Using Ipv6 - Toshiba e-STUDIO 332s User Manual Advanced

Changing Network Settings From the Web Page

Using SNMPv3

When you use the SNMP manager that supports
SNMPv3, the management of the machine is
encrypted by SNMP.
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network Manager]>[SNMP]>
3
[Setting].
Follow the on-screen instructions to
4
specify detailed settings.
Click [Send].
5
The network card reboots to enable the new
settings.
Memo
Your machine has an SNMP agent. You can confirm and
change the machine settings by a commercially available
SNMP agent. For the MIB of the machine, refer to the
software DVD-ROM and check the "README" file in the
[Misc] > [MIB] folder.

Using IPv6

Your machine supports IPv6. The machine
obtains the IPv6 address automatically. You
cannot set the IPv6 address manually.
The machine supports the following protocols:
For Printing:
- LPR
- IPP
- RAW (Port9100)
- FTP
For Configuration:
- HTTP
- SNMPv1/v3
- Telnet
Operation is confirmed under specific conditions
for the following applications.
Protocol
LPD Windows 7
Windows Vista
Windows XP
Port9100 Windows 7
Windows Vista
FTP Windows 7
Windows Vista
Windows XP
Mac OS X
HTTP Windows XP
Mac OS X
Telnet Windows 7
Windows Vista
Windows XP
Mac OS X
*1) To specify a host name, edit the host's
file or access via the DNS server.
*2) On Telnet, when only IPv6 is enabled
you cannot specify a host name by the
DNS server.
*3) You cannot specify a host name when
you use a link local address to access.
*4) Enter an IPv6 address enclosed with
square brackets.
Note
To use IPv6 on Windows XP, install IPv6.
Enabling IPv6
Access the machine's web page and log
1
in as the administrator.
Select [Admin Setup].
2
Select [Network]>[TCP/IP].
3
Select [Enable] for [IPv6].
4
Click [Submit].
5
The network card reboots to enable the new
settings.
- 154 -
OS Application
LPR (Command
Prompt)
LPRng
FTP (Command
Prompt)
FTP (Terminal)
Internet Explorer
6.0
Safari (2.0-
v412.2)
Telnet (Command
Prompt)
Telnet (Terminal)
Condi
tion
*1, 2, 3
*1, 2, 3
*1, 2, 3
*1, 2, 3
*1, 2, 3
*1, 2,
3, 4
*1, 2, 3
*1, 2, 3