Reducing Vibration And Noise During <<Wash Dry>> Operations; Reducing Vibration And Noise During Spin Or Speeding Up Startup - Hitachi BD-S5500 Operating Instructions Manual

Reducing vibration and noise during <<WASH DRY>> operations
You can change the spin speed during the dry cycle of <<WASH DRY>> operations.
Depending on the flooring strength and other factors, vibration during machine operation may
increase. Adjust this setting according to your operation environment.
Press <ON> to turn on the power.
Hold the <DELAY START> button for at least 3 seconds.
Press <RINSE>.
Press <START>.
Pressing the <START> button completes the setting.
Press <OFF> to turn off the power.
This setting will be saved.
To change the setting, perform the same operation.
The speed for the intermediary spin between the wash
and rinse cycles cannot be changed.

Reducing vibration and noise during spin or speeding up startup

In addition to the Standard Mode (default setting) for spin, a low vibration/noise mode and a
smooth startup mode are available.
Press <ON> to turn on the power.
Hold the <DELAY START> button for at least 3 seconds.
Press <SPIN> to change the setting.
Press <START>.
Pressing the <START> button completes the setting.
Press <OFF> to turn off the power.
This setting will be saved.
To change the setting, perform the same operation.
To change the default setting
To change the default setting
The display changes with each press of the
<RINSE> button.
High-Speed Mode (default setting)
Mid-Speed Mode
(Operation time will be longer.)
Low-Speed Mode
(Operation time will be longer.)
The display changes with each press of the
<SPIN> button.
Low-Vibration Mode
Reduces the vibration and noise during
spin. (Operation time will be longer.)
Standard Mode (default setting)
Smooth Mode
Spin startup is smoother. (Depending
on the type of laundry, vibration and
noise may increase.)
71