Attach The Front Bezel - Hitachi AMS 2100 Getting Started Manual

Legend:

6. Attach the front bezel

Attaching the front bezel to the storage system is optional. To attach it:
1. The front of the bezel has two hooks, one on the lower right side and
one on the upper right side.
a. Insert the hook on the lower right side of the bezel into the hole on
the bottom right part of the base unit.
b. Insert the hook on the upper right side of the bezel into the hole on
the top right part of the base unit.
2. After the hooks are engaged, gently push the bezel against the base
unit's front panel until the bezel snaps into place.
3. Lock the bezel by inserting the key in the keyhole and turning
counterclockwise.

 

Figure 1-3: Installing a Drive or Drive Filler
Guide rail

Hook

Rectangular hole

Handle

Stopper

Latch (round dent)

Storage area for components

Address label

Screw holder

Disk drive

Hitachi AMS 2100/2300 Getting Started Guide
Installing a Drive
 
Installing a Filler




9