Install And Log In To Navigator - Hitachi AMS 2100 Getting Started Manual

6. Click OK to exit the Java Runtime Settings dialog box.
7. Click OK in the Java tab to close the Java Control Panel dialog box.
8. Close the Windows Control Panel.
Clients running Solaris or Linux
If your client runs Solaris or Linux, perform the following procedure:
1. From an XWindows terminal, execute the <JRE installed directory>/
bin/jcontrol to run the Java Control Panel.
2. Click View in the Java Applet Runtime Settings section. The Java
Runtime Settings dialog box appears.
3. In the Java Runtime Parameters field, type -Xmx464m.
4. Click OK to exit the Java Runtime Settings dialog box.
5. Click OK in the Java tab to close the Java Control Panel dialog box.

12. Install and log in to Navigator 2

The following procedure describes how to install and log in to Navigator 2.
TIP: For the best Navigator 2 experience, we recommend you install
Navigator 2 on a new or dedicated PC.
1. Find out the IP address of the management console (for example, using
ipconfig). Then change the console's IP address to 192.168.0.x where x
is a number from 1 to 254, excluding 16 and 17. Write this IP address
on a piece of paper. You will be prompted for it during the Navigator 2
installation procedure.
NOTE: The default IP address for Controller 0 management port is
192.168.0.16. The default IP address for Controller 1 management port is
192.168.0.17.
2. Disable pop-up blockers in your Web browser. We also recommend that
you disable anti-virus software and proxy settings on the management
console when installing the Navigator 2 software.
3. Insert the Navigator 2 CD in the management console CD drive and
follow the installation wizard.
• If the CD does not auto-run, double-click the following file, where
nnnn is the Navigator 2 version number:
\program\hsnm2_win\HSNM2-nnnn-W-GUI.exe
• The installation process takes about 15 minutes to complete.
• During the installation, the progress bar may pause for several
seconds. This is normal and does not mean the installation has
stopped.
Hitachi AMS 2100/2300 Getting Started Guide
21