Hitachi AMS 2100 Getting Started Manual page 41

7. Click the OK button in the lower right corner of the page.
8. Click the Close button.
You can now perform the same procedure for iSCSI targets. Or you can skip
to Create RAID groups, logical units, and host groups on page
1. Redisplay the Groups page and click iSCSI Targets (see
Click Groups
2. When the iSCSI Targets page appears (see
check an iSCSI target in the iSCSI Targets tab.
Hitachi AMS 2100/2300 Getting Started Guide
Click iSCSI
Targets
Figure 1-32: Groups Page
42.
Figure
Figure 1-33 on page
1-32)
40),
39