Set Java Runtime Parameters If Necessary - Hitachi AMS 2100 Getting Started Manual

Configuring the storage systems

11. Set Java Runtime parameters if necessary

After you install the storage units, use the supplied Navigator 2 software to
configure the storage units. If you intend to use the Advanced Settings in
Navigator 2 on clients running the Microsoft Windows, Solaris, or Linux
operating system, download JRE v6.0 and set the JRE parameters described
in the following sections. Otherwise, Advanced Settings will fail, and you will
be locked out and unable to access Advanced Settings until the login times
out (20 minutes). For information about Java updates, please visit
http://www.java.com/en/download/help/java_update.xml.
If you do not intend to use Advanced Settings, skip to Step
log in to Navigator 2 on page
Clients running Microsoft Windows
If your client runs Microsoft Windows, perform the following procedure:
1. Click the Windows Start menu, point to Settings, and click Control
Panel. The Windows Control Panel appears.
2. From the Windows Control Panel, double-click Java Control Panel. The
Java Control Panel appears.
3. Click the Java tab. The Java tab is displayed (see
4. Click View in the Java Applet Runtime Settings section. The Java
Runtime Settings dialog box appears.
5. In the Java Runtime Parameters field, type -Xmx464m.
20
21.
Figure 1-15: Java Tab
Hitachi AMS 2100/2300 Getting Started Guide
12. Install and
Figure 1-15).