Advertisement
DG-102SH VoIP Station Gateway
If the boot up process has proceeded too far and you did not reach the Boot Menu shown above, unplug the device,
plug it back in (to restart the boot up process), and press <Ctrl+C> until the Boot Menu appears.
In order for the VoIP to function, you must provide the device with the following information:
♦
Define where the device receives its IP settings from.
♦
IP settings – IP Address, Subnet Mask, and Default Gateway
♦
Gatekeeper Mode– Choose the Gatekeeper mode
♦
Gatekeeper IP –The Gatekeeper IP address is necessary if you chose the <Manual Discovery> item within the
Gatekeeper Mode
All of these settings are found in the first menu item in the Boot Menu named IP Configuration.
Use the <Tab> key to highlight the first menu item Configure IP and press <Enter>. The IP Configuration
screen will now be displayed:
8
Advertisement
