D-Link DG-102SH User Manual page 67

Voip station gateway

Hide thumbs Also See for DG-102SH:

! !

The items on this window are described below:

♦

Software Update Mode This specifies downloading the image file through a WAN Link or LAN Link.

♦

TFTP Server Address The IP address of the TFTP server where the runtime or configuration file is

located. This entry is used only if the Firmware Update is set to Enable.

♦

Last TFTP Server Address This is a read-only field that displays the IP address of the last TFTP server

to be accessed.

♦

Firmware Update Determines whether or not the device will try to look for a runtime image file on the

TFTP server.

♦

File Name The complete path and filename of the runtime image file on your TFTP server to be uploaded

to the device.

♦

Use Config File Toggle to Enabled to use the settings in a configuration text file when the device is reset

(rebooted).

♦

Config File Name The complete path and filename on the TFTP server for the desired configuration file.

Click on the Save button at the bottom right of the window to save the settings.

Note: After finishing the Update Firmware, please Must perform Factory Reset to make sure firmware

update is complete

,! ! !

DG-102SH VoIP Station Gateway