Panasonic KX-TDA100 Programming Manual page 140

2.7 [1] Configuration
Low Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a low speed pulse dial. Low Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Value Range
4 × n (n=6–20) ms
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Guide References
None
Low Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a low speed pulse dial. Low Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Value Range
4 × n (n=3–15) ms
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Guide References
None
High Speed Pulse Dial—Pulse % Break
Specifies the % break for a high speed pulse dial. This is the ratio between the break (on-hook) signal
and make (off-hook) signal in a pulse dial.
Value Range
Other, 60 %, 67 %
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
140 PC Programming Manual