Panasonic KX-TDA100 Programming Manual page 787

Error Log for Centralised VM—Network MSW Transmission (Buffer)
Enables error information to be logged in the PBX if the quantity of network message waiting
information being re-transmitted is larger than the transmission buffer.
Value Range
Disable, Enable
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
2.15.1 [9-1] TIE Table—Enhanced QSIG Call Information (Optional SD Card Required)
Feature Guide References
1.30.5.2 Centralised Voice Mail
Remote
Remote—Analogue Remote (Modem) Floating Extension Number
Specifies the floating extension number for analogue remote maintenance. To enable this setting, an
RMT card must be installed, and Remote—Remote Programming on this screen must be enabled.
Value Range
For KX-TDA30/KX-TDA100/KX-TDA200:
Max. 4 digits (consisting of 0–9)
For KX-TDA600:
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.17.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.3.1 PC Programming
Remote—ISDN Remote Floating Extension Number
Specifies the floating extension number for ISDN remote maintenance. To enable this setting,
Remote—Remote Programming on this screen must be enabled.
Value Range
For KX-TDA30/KX-TDA100/KX-TDA200:
Max. 4 digits (consisting of 0–9)
2.17 [11] Maintenance
PC Programming Manual 787