3-7-1] Vm(Dpt) Group-System Settings - Panasonic KX-TDA100 Programming Manual

2.9.16 [3-7-1] VM(DPT) Group—System Settings
A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports
of the PBX. The DPT ports that are connected to the VPS are called a VM (DPT) Group.
With the KX-TDA30, a maximum of 1 VM (DPT) Group can be programmed; with the KX-TDA100/
KX-TDA200, 2 VM (DPT) Groups can be programmed; and with the KX-TDA600, 8 VM (DPT) groups
can be programmed.
Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting
tone is not sent to any VM port.)
Value Range
Disable, Enable
Maintenance Console Location
2.9.16 [3-7-1] VM(DPT) Group—System Settings
Programming Manual References
2.7.5 [1-1] Slot—Extension Port
Feature Guide References
1.2.2.4 Queuing Feature
1.24.1 Voice Mail (VM) Group
Intercept to Mailbox
Enables the PBX to send the mailbox number of the called extension to the VPS when a call is
redirected to the VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number,
the VPS answers the call with the appropriate mailbox.
Value Range
Disable, Enable
Maintenance Console Location
2.9.16 [3-7-1] VM(DPT) Group—System Settings
Programming Manual References
2.7.5 [1-1] Slot—Extension Port
2.9.1 [3-1-1] Trunk Group—TRG Settings—Intercept (not available for MPR Software File Version
3.1000 or later)—Intercept Destination—Day, Lunch, Break, Night (not available for MPR Software
File Version 3.1000 or later)
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Intercept Destination—When called
party does not answer—Day, Lunch, Break, Night
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Intercept Destination—When
called party does not answer—Day, Lunch, Break, Night
2.9 [3] Group
PC Programming Manual 507