Panasonic KX-TDA100 Programming Manual page 446

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

2.8 [2] System
Private Network—Public Call through Private Network—Minimum Public
Caller ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered
as a call from a public network.
Value Range
0–15
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Private Network—Common Extension Numbering for 2 PBXs (Optional SD
Card Required)
Enables extensions at two PBXs connected in a network (not including a VoIP network) to have the
same leading number. For example, extension 101 is registered at PBX 1, and extension 102 is
registered at PBX 2. Only the Extension Number Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
Programming Manual References
2.15.1 [9-1] TIE Table—Leading Number
Feature Guide References
1.30.1 TIE Line Service
System Wireless—Out of Range Registration
Selects whether the PBX can set the status of a PS to Out of Range if no signal is received from the
PS for a preset length of time. This feature must be enabled to allow PS roaming.
Value Range
Disable, Enable
Maintenance Console Location
2.8.17 [2-9] System Options
446
PC Programming Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda600

Table of Contents