2.7 [1] Configuration
2.7.29 [1-1] Slot—E&M Port—Port Command (KX-TDA100/KX-
TDA200/KX-TDA600 only)
Commands for the E & M channels can be programmed.
INS
Puts the channel in service.
Value Range
Not applicable.
Maintenance Console Location
2.7.29 [1-1] Slot—E&M Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.28 [1-1] Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the channel, for example, for
the purpose of repair.
Value Range
Not applicable.
Maintenance Console Location
2.7.29 [1-1] Slot—E&M Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.7.28 [1-1] Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
288
PC Programming Manual