Feed Final Assembly Attachment - Brother PR600II Service Manual

Main unit
17

Feed final assembly attachment

1. Attach the 2 Y-guide shafts 1 to the feed final assembly, and then attach
the feed final assembly to the base frame.
2. Secure the 2 fixed Y-shaft plates with the 4 screws 1 (one each on left and
right).
3. Pull the feed final assembly toward you.
4. Connect the FFC (SML2CD-Y) connected to the feed final assembly's
connect PCB to the Y-area sensor assembly 2, and lock the connector.
5. Attach the sheet 3, FFC (SML2CD-Y), and sheet B 4 to the base frame
with the screw 2.
Start movie clip (CD-ROM version only)
1
2
3 - 88
Feed unit
Taptite, Bind S
M4X10
Screw, Bind
M4X6
Torque
1.47 – 1.96 N-m
Torque
1.18 – 1.57 N-m
4
1 1 1
2
2
3