Brother PR600II Service Manual page 320

Wiring instructions
3.
Left side of arm.
Cover all lead wires with a spiral
tube and secure the tube
Make sure that the bulge
on the clamp is inside
when securing the tube.
Cord clamp
Spiral B
4. Right side of arm (1)
Thread the lead wire
through the hole on
the thread guide base.
7 - 4
Motor bracket
LED lead wire
Wiper motor
Hook
Sensor shutter
Needle thread base
LED lead wire guide
Wiper lead wire
Semicir-
cular sag
Wiper sensor