Brother PR600II Service Manual page 105

Main unit
9
Operation panel B attachment
1. Attach the lead wire 2 on operation panel B 1 to the connector on the
panel PCD.
2. Attach the grounding wire 3 to the PCB attachment plate with the screw
1.
*Key point
• Secure the two lead wires with the clip.
3. Position operation panel B 1 to operation panel A, and secure these parts
with the four screws 2.
1
2
10
USB cord holder attachment
1. Attach the three USB cord holders 1 with the 3 screws 1.
*Key point
• Insert the lug on the USB cord holder 1 into the positioning
hole on the operation panel.
1
11
Panel B support attachment
1. Attach the panel B support 1 with the 2 screws 1.
*Key point
• The notch on the panel B support 1 must face in.
1
Operation panel
Screw, Bind
0.49 – 0.69 N-m
M3X4
Taptite, Bind B
0.39 – 0.78 N-m
M3X10
Taptite, Bind B
0.39 – 0.78 N-m
M3X10
Taptite, Cup B
0.78 – 1.18 N-m
M4X14
1
Torque
Torque
1
Torque
Torque
2
1 3
2
1
1
1
3 - 7