Panasonic DBS Section 540 Reference Manual page 87

Programming
Parameter
Description
Address
Options
Parameter
Description
Address
Options
Parameter
Description
Address
Options
Parameter
Description
Address
Options
Notes
DBS-2.3/9.2-540
NRS Dial
Assigns the dialed digits that receive NRS processing.
When the system finds an exact match of these digits, NRS
processing is triggered
FF1 8# 4# 8# 2# (1-50)# 1# (XXXXXX)#
1-50=The NRS Entry Number. Up to 50 NRS entries are
available for each system
XXXXXX=The dialed digits that must be matched to use
NRS. Up to 6 digits may be entered. All trailing digit
positions are assumed null. The default = null (******)
NRS Length
Assigns the number of digits to collect for this dialed
number before routing the call.
FF1 8# 4# 8# 2# (1-50)# 2# (1-99)#
1-99=The minimum number of digits to collect before NRS
processing. The default value is 11 digits.
NRS Route Access Code
Selects the DBS node to outdial the call to the public
network.
FF1 8# 4# 8# 2# (1-50)# 3# (0-4)#
0=No network call routing
1=Route call through DBS 1
2=Route call through DBS 2
3=Route call through DBS 3
4=Route call through DBS 4
Outgoing Dial Type
Specifies the outdialing dial type for calls on the Network
Group; either rotary (dial pulse) or DTMF.
FF1 8# 4# 8# 3# (NWG)# 1# (0/1)#
0=Rotary Dial (Pulse Dial)
1=DTMF
DTMF must be enabled for Network Paging operation.
This command requires a system restart to take effect.
T1 Networking - Revised April 2000
T1 Settings Added for Networking
Page 87