Table of Contents
Advertisement
DBS Network Telephone User Guide
This guide describes telephone operation related to
network features. This guide may be copied and used
in addition to the DBS Telephone User Guide.
Up to four DBS Systems may be interconnected in a
DBS network. Calls may be made between systems
(called network nodes) by dialing a route access code
(1-4) that identifies the DBS node as the first digit of a
four-digit number.
Note: Many of the networking features described
below must be enabled before being used. For
information on feature availability, contact your
telephone system dealer or system administrator.
Calling a Network Extension
1.
Pick up the handset.
2.
Dial the four digit extension number.
Calling the Attendant
To dial the network attendant:
1.
Pick up the handset.
2.
Press "0."
3.
Complete the call and replace the handset.
To dial the local attendant (when the network
attendant is located at another DBS):
1.
Pick up the handset or press ON/OFF.
2.
Enter the local DBS access code (1-4) followed by
"0."
3.
Complete the call and replace the handset.
To dial an attendant located at another DBS:
1.
Pick up the handset or press ON/OFF.
2.
Enter the DBS access code (1-4) followed by "0."
3.
Complete the call and replace the handset.
Call Forwarding to Extensions on
Another Node
Any call can be forwarded to an extension on another
network node by assigning the destination extension to a
Speed Dial bin and assigning Call Forward Outside to
that Speed Dial.
To assign Personal Speed Dials (for forwarding
to an extension on another node):
1.
Press ON/OFF.
2.
Press PROG.
3.
Press a One-Touch key or press AUTO followed
by the personal speed dial bin number (900-909).
4.
Dial the extension number.
5.
Press HOLD.
6.
Press ON/OFF.
To activate Call Forwarding to an extension on
another node:
1.
Press the ON/OFF key.
2.
Dial "72."
3.
Dial the appropriate call forwarding code.
Call Forward Type
All
Busy/No Answer
Busy
No Answer
4.
Press AUTO plus the appropriate speed dial
number.
5.
Press the ON/OFF key.
To cancel Call Forwarding
1.
Press ON/OFF.
2.
Dial "72."
3.
Hang up.
4.
Complete the call and replace the handset.
Network Paging
DBS Networking supports the standard paging feature
on the local DBS as well as paging on a distant
networked DBS.
Paging on the local DBS operates the same as for a non-
networked DBS. To page on the local DBS, dial #
followed by the number of the desired paging group
(00-07).
Network paging requires that a leading DBS Network
Route Access Number (1-4) be dialed preceding the
page code. For instance, to page on DBS 2 Paging
Group 03, dial 2#03.
To use the Paging feature on the local DBS:
1.
Pick up the handset.
2.
Press "#," then enter the number of the desired
Paging Group (00-07).
3.
Make your announcement.
4.
Replace the handset.
To use the Paging feature to page on a Network
DBS:
1.
Pick up the handset.
2.
Dial the Network DBS Access Code (1-4). This
selects the DBS.
3.
Press "#," then enter the number of the desired
Paging Group (00-07).
4.
Make your announcement.
5.
Replace the handset.
Code
0
1
2
4
Page 141
Advertisement
Table of Contents
