Panasonic DBS Section 540 Reference Manual page 113

Network Feature Operation
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Press the PROG key.
5. Hang up to complete the transfer.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Recall Timer for Extension-Transferred CO Calls
• FF1 (System): Recall Timer for Extension-Transferred Intercom Calls
• FF1 (System): Recall Timer for Attendant-Transferred CO Calls
• FF1 (System): Recall Timer for Attendant-Transferred Intercom Calls
Considerations
• The Attendant can transfer calls even if the system is not set for Onhook
• You cannot transfer a call to an extension that has Do Not Disturb or
• You can transfer a call to an extension that has Call Forwarding activated.
DBS-2.3/9.2-540
• "Hold TRK #XX" (where "XX" is the line number) appears on the
display.
• If the third party is on the same DBS, "Talk-EXT NXXX" (where
"NXXX" is the extension) appears on the display.
• If the third party is on the another network DBS, "NET Talk GN"
(where "N" is the network access code) appears on the display.
• The line LED for the original outside line turns red.
• If the third party is on the same DBS, "TRF. NXXX TRK #YY" (where
"NXXX" is the extension and "YY" is the line) appears on the display.
• The third party need only pick up the handset to speak to the outside
line.
Transfer.
Absence Message activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if phone "A" is covered to phone "B," calls that are
T1 Networking - Revised April 2000
Network Call Transfer
Page 113