Figure 2.5 Initial Value Of Ssl (Disabled); Figure 2.6 Ssl Setting (Enabled) - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.2.3 Enabling SSL
Before the key management function is used, Secure Socket Layer (SSL) must be enabled to access the remote
panel securely.
When SSL is enabled, https must be used to connect to the remote panel.
SSL is disabled by default.
Procedure
1
Move to the [Configuration > Web Management] screen.

Figure 2.5 Initial value of SSL (disabled)

2
Select the [SSL (Secure Socket Layer)] checkbox to enable SSL.
3
Click [Submit] to update the setting.

Figure 2.6 SSL setting (enabled)

FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
26
Copyright 2016 FUJITSU LIMITED P3AG-1192-02ENZ0