Chapter 3
Setup Methods for Different Operations
This chapter explains the setup procedures in examples of general operations with the key management
function.
3.1
Sharing Data among Multiple Tape Libraries
This section explains a general setup procedure for assigning the same master key to multiple tape libraries
to share data cartridges (data) among them.
Make appropriate settings by following the procedure below.
Procedure
1
Set the license key of the Key Management Function Option of each tape library.
One Key Management Function Option is required for each tape library.
2
Assign a master key for the main tape library.
For information on how to set the master key, refer to
FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
Management console
Tape library 01
Tape library 02
64
Copyright 2016 FUJITSU LIMITED
"2.1.3 Setting the Master Key" (page
Tape library 03
33).
P3AG-1192-02ENZ0