Chapter 3 Setup Methods For Different Operations; Sharing Data Among Multiple Tape Libraries - Fujitsu ETERNUS LT140 User Manual

Chapter 3
Setup Methods for Different Operations
This chapter explains the setup procedures in examples of general operations with the key management
function.
3.1

Sharing Data among Multiple Tape Libraries

This section explains a general setup procedure for assigning the same master key to multiple tape libraries
to share data cartridges (data) among them.
Make appropriate settings by following the procedure below.
Procedure
1
Set the license key of the Key Management Function Option of each tape library.
One Key Management Function Option is required for each tape library.
2
Assign a master key for the main tape library.
For information on how to set the master key, refer to
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
Management console
Tape library 01 Tape library 02
66
Copyright 2019 FUJITSU LIMITED
"2.1.4 Setting the Master Key" (page
Tape library 03
35).
P3AG-3762-02ENZ0