Figure 2.10 Setting The Key Management Function - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.2.5 Enabling and Disabling the Key Management Function
This setting enables or disables the key management function.
In logical library (or partition) configurations, encryption is enabled or disabled for each logical library (or
partition).
• Even when this setting is performed, data that is already written in a data cartridge is not encrypted.
After deleting existing data and enabling the key management function, write the data to the data
cartridge again.
• To perform this setting, the key management function license must be set in advance. For details, refer to
"2.1.1 Setting the Key Management Function License" (page
• When changing the logical library (or partition) configuration or when changing the setting to enable or
disable the key management function, back up the encryption key in advance.
Procedure
1
Move to the [Configuration > Encryption] screen.

Figure 2.10 Setting the key management function

2
Select [LT Library Encryption (Licensed)].
FUJITSU Storage ETERNUS LT260 Tape Library Key Management Function Option User's Guide
29
Copyright 2016 FUJITSU LIMITED
22).
P3AG-1192-02ENZ0