Appendix A Parameter List
A.1 System Management
•
Domain Name / IP Address
Description
Input condition/
Display contents
•
Port No.
Description
Input condition/
Display contents
•
LAN Port
Description
Input condition/
Display contents
A.1.10
Key Management
A.1.10.1
Setup Key Management Machine Name
For details about this function, refer to
●
Key Management Machine Name Setting
•
Key Management Machine Name
Description
Input condition/
Display contents
Input the domain name or the IP address of the Syslog server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to
"Available IPv6 Address" (page 107)
current setting is displayed, the IPv6 address is displayed as an abbreviation.
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to
"IPv6 Address Notation" (page 378)
•
For domain name
Up to 63 alphanumeric characters and symbols
Input the port number used to send an audit log.
•
Numeric characters
•
1 - 65535
Input the LAN port number that is used to send an audit log.
•
MNT
•
RMT
"1.11.1 Setup Key Management Machine Name" (page
Input the name of the device that is to be used to connect to the key server. The key
management device name corresponds to "Machine ID" in the key server.
•
Alphanumeric characters
•
Symbols (underscore "_")
•
The first letter must be an alphabetic character
•
Up to 48 characters
751
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details. When the
for details.
166).
P2X0-1270-13ENZ0