Fujitsu ETERNUS DX60 S3 User Manual page 791

Appendix A Parameter List
A.3 Volume Management
• Number of Volumes
Description
Input condition/
Display contents
When "Volume No." is specified, only one volume can be created at a time. Input "1" for "Number of Volumes".
• Volume No.
Description
Input condition/
Display contents
An existing volume number cannot be specified.
Specify the number of volumes to be created.
Note that "1" is displayed when "Manual" is selected for "Concatenation Order". In this
case, the number of volumes cannot be specified.
For details on the maximum number of volumes that can be created for each model,
refer to "The maximum number of volumes that can be created for each model" (page
787).
1 - 128
When specifying the volume number for a new volume, select the "Set Value" checkbox
and input the volume number.
•
"Specify" checkbox
-
Selected
-
Cleared
•
Volume No.
Numeric characters (decimal)
The following volume numbers can be used for each model:
-
For the ETERNUS DX60 S3
0 - 1023
-
For the ETERNUS DX100 S3
0 - 2047
-
For the ETERNUS DX200 S3
0 - 4095
-
For the ETERNUS DX500 S3/DX600 S3
0 - 16383
-
For the ETERNUS DX8700 S3/DX8900 S3
0 - 65534
-
ETERNUS DX200F
0 - 1535
791
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0