Fujitsu ETERNUS DX60 S3 User Manual page 867

Appendix A Parameter List
A.4 Connectivity Management
• FC Frame Size
Description
Input condition/
Display contents
• Reset Scope
Description
Input condition/
Display contents
• Release Reservation if Chip is Reset
Description
Input condition/
Display contents
●
Destination
• Checkbox to select copy destination port
Description
Input condition/
Display contents
Select the FC frame size (bytes) of the target port.
"FC Frame Size" specifies the length of the communication information.
•
512
•
1024
•
2048
Specify the reset scope of the target port.
Reset scope is the range where the command reset request from the server is performed,
when the target port is connected to multiple servers.
•
I_T_L (I: Initiator, T: Target, L: LUN)
Reset (cancel) the command request from the server that sent the command reset
request.
•
T_L (T: Target, L: LUN)
Reset (cancel) the command request from all of the servers that are connected to the
port.
Select whether to "Enable" or "Disable" the function to release the reserved status of the
volume when the target port (chip) is reset.
•
Enable
•
Disable
Select the checkbox of the copy destination port.
Checkbox
•
Enable
•
Disable
867
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0